膜科学与技术

双层刮膜中分层/粘结和开孔结构形成机理研究

作者：张云燕¹，季瑜¹，隋波²，李雪梅¹，殷勇¹，王周为¹，何涛¹

单位： 1材料化学工程国家重点实验室,南京工业大学化学与化工学院,南京210009;2烟台万化氯碱公司,

关键词：同时刮膜法;微滤膜;分层;粘结性

出版年,卷(期):页码： 2011,31(1):25-34

摘要：

本文以PEI与PSf为对象,研究了双层刮膜过程中两种高分子分层的原因,考察了PSf膜表面开孔结构的形成原理.考察了两层制膜液间的凝胶值之差、膜的收缩率以及添加剂PVPK-90等热力学和动力学参数对分层/粘结性的影响.研究发现,凝胶值作为一个热力学参数不能单独作为高分子分层/粘结的标准;同时发现,通过提高凝胶浴温度减少PEI膜与PSf膜之间的收缩率差别可以促进粘结.研究还发现,PVP K-90起到了促进膜层间粘结性的作用.采用含不同量溶剂的凝胶浴,证明了双层刮膜过程中PSf膜的表面开孔结构是由于PEI膜为支撑层提供了一个近似富含溶剂的凝胶浴得到的.

In this paper, PEI and PSf polymer solutions were used for co-casting. Mechanisms for delamination/adhesion were investigated. It was found that the contribution of the coagulation values of membrane solutions is insignificant to the adhesion of two layers. Instead, membrane shrinkage appears to play a significant role because composite membranes were obtained by minimising their shrinkage difference at the thickness direction by the increase of the coagulant temperature. In addition, the PVP in PSf solution also improves the adhesion between PEI and PSf layer. The open structure formation mechanism of PSf membrane was ascribed to a solvent enriched environment caused by the presence of PEI coating layer, which was confirmed by addition of a large amount of solvent into water coagulant. Finally, the concave defects formation on PSf surface was proposed as the impact of the growth of finger-like macrovoids in PEI layer. The results provides a solid theoretical basis for the expanding the application of co-casting technique.

张云燕（1987-）,女,甘肃白银市人,硕士研究生,主要从事有机高分子膜制备和应用的研究.( kzfeiyan@163.com).

参考文献：

[1] Baker R W. Membrane Technology and Application[B]. JohnWiley & Sons Ltd, 2004. USA.
[2] Lioyd D R, Kinzer K E, Tseng H S. Microporous membrane fo- rmation via thermally-induced phase separation.(I) Solid-liquid phase separation[J]. J Membr Sci, 1990, 52: 239-261.
[3] Zeman L, Fraser T. Formation of air-casting cellulose acetate membrane. Part I. Study of macrovoid formation[J].
J Membr Sci, 1993, 84: 93-106.
[4] Zeman L, Fraser T. Formation of air-casting cellulose
acetate membrane. Part. Kinetics of demixing and
macrovoid gro- wth[J]. J Membr Sci, 1994, 87: 267-279.
[5] Strathmann H, Koch K. The formation mechanism of phase inversion membranes[J]. Desalination 1977, 21:241-249.
[6] Kesting R E. Phase inversion membranes[J].John Wiley, 1985, 269:131-152.
[7] Mulder M. 膜技术基本原理[B]. 第二版. 北京:清华大学出版社, 1999.
[8] Wang D L, Li K, Teo W K.Relationship between mass ratio of nonsolvent-additive to solvent.in membrane casting solution and its coagulation value[J]. J Membr Sci, 1995, 98: 233-240.
[9] Li X M, Ji Y, He T. A Sacrificial-layer Approach to Prepare Mi- crofiltration Membranes[J]. J Membr Sci, 2008, 320: 1-7.
[10] 何涛,李雪梅,李战胜.一种多孔分离膜的制备方法[P].中国, CN 101091880A,2007年12月26日.
[11] Li D F, Chung T S, Wang R.Morphological aspects and struc- ture control of dual-layer asymmetric hollow fiber membranes formed by a simultaneous co-extrusion approach[J]. J Membr Sci, 2004, 243: 155-175.
[12] Grobe V, Albrecht W, Makschin W etal .Multilayer
membran-
es I. A new type of asymmetric synthetic
membranes[J]. Syn Poly Membr, 1987.127-140
[13] Cristina C P, Nobrega R, Peinemann K V etal. Hollow fiber membranes obtained by simultaneous spinning of two poly- mer solutions: a morphological study[J]. J Membr Sci, 2003, 226: 35-50.
[14] Cristina C P, Nobrega R, Cristiano P B. Membranes obtained by simultaneous casting of two polymer solutions[J]. J Membr Sci, 2001, 192: 11-26.
[15] Luciana T D, Cristina C P, Claudio H etal. Polyurethane/p- ol-yethersulphone composite hollow fibers produced by simult - aneouss pinning of two polymer solutions[J]. J Membr Sci, 2008, 311: 12-22.
[16] Li D F, Chung T S, Wang R etal. Fabrication of fluoropolyi-mide/polyethersulfone (PES) dual-layer asymmetric hollow fiber membranes for gas separation[J]. J Membr Sci, 2002, 198: 211-223.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com