膜科学与技术

仿蜘蛛网结构油水分离膜的制备和性能探索

作者：汪祺，邓雪松，郑甜甜，高祎欣，程琦，杨景，强荣荣，李昕阳，马文松，林立刚，张玉忠

单位：天津工业大学材料科学与工程学院，省部共建分离膜与膜过程国家重点实验室，天津300387

关键词：水凝胶；膜分离；油水分离；仿生；改性

出版年,卷(期):页码： 2021,41(2):9-17

摘要：

具有三维网络结构和亲水特性的水凝胶用于分离膜改性备受关注.本文以聚偏氟乙烯（PVDF）膜为基质，将羧甲基纤维素（CMC）通过自交联方式引入膜表面，制备了仿蜘蛛网结构的CMC-PVDF改性膜，对膜的油水分离性能、抗污染性能、机械性能等进行了考察.结果表明，相对于原膜，改性膜的油水乳液通量增加了4倍，达到612 L/(m2·h），油水分离性能从74％提高到94％以上；改性膜具有较好的抗污染能力；相对于原膜，CMC-PVDF改性膜的弹性模量从3.647 MPa提高到了14.86 MPa，伸长率从31.5%提高到了58.4%，这与膜表面的仿蜘蛛网结构有关.通过本研究所述方法得到了兼具较高分离性能、抗污染性能和机械性能的膜材料，对分离膜改性研究具有一定借鉴价值.

Hydrogels with three-dimensional network structure and hydrophilic properties have attracted much attention for the modification of separation membranes. In this paper, polyvinylidene fluoride (PVDF) membrane is used as the substrate, and carboxymethyl cellulose (CMC) is introduced into the membrane surface through self-crosslinking, and a CMC-PVDF modified membrane with a spider web structure is prepared, which separates oil and water from the membrane. Performance, anti-pollution performance, mechanical performance, etc. were investigated. The results show that coMPared with the raw membrane, the oil-water emulsion flux of the modified membrane increased by 4 times to 612 L/(m2·h), and the oil-water separation performance increased from 74% to more than 94%; The modified membrane has better anti-pollution ability;CoMPared with the raw membrane, the elastic modulus of the CMC-PVDF modified membrane has increased from 3.647 MPa to 14.86 MPa, and the elongation has increased from 31.5% to 58.4%. This is related to the spider web structure on the surface of the membrane. Through the method described in this study, a modified membrane material with high separation performance, anti-fouling performance and mechanical performance was obtained, which has certain reference value for the study of separation membrane modification.

汪祺（1995-），男，浙江嵊州人，硕士研究生，主要从事分离膜的研究

参考文献：

[1] 刘广宇. 新时期关于油田水污染处理技术及利用研究[J]. 北方环境, 2020, 32: 74-76.
[2] Zhao X, Luo Y, Tan P, et al. Hydrophobically modified chitin/halloysite nanotubes composite sponges for high efficiency oil-water separation[J]. International Journal of Biological Macromolecules, 2019, 132: 406-415.
[3] Guo Y, Zhou X, Yi X, et al. Superhydrophobic behaviors of nanoSiO2 coating on stainless steel mesh and its application in oil/water separation[J]. Applied Nanoence, 2020, 10: 1511-1520.
[4] Barbosa T, Silva F, Barbosa A, et al. Synthesis and application of a composite NaA zeolite/gamma-alumina membrane for oil-water separation process[J]. Cerâmica, 2020, 66: 137-144.
[5] Zhang X, Li K, Yu Y, et al. Application of molecular simulation technology in the field of membrane separation technology[J]. Membrane Science and Technology, 2019, 39: 105-115.
[6] Tomi L, Danilovi D, Karovi-Marii V, et al. Application of membrane technology for separation CO2 from natural gas[J]. Podzemni radovi, 2020, 36: 61-68.
[7] Zhang Y, Tian M, Xu K. Current development of membrane separation technology[J]. Xiandai Huagong/Modern Chemical Industry, 2017, 37: 6-10.
[8] Mirasol F. Membrane technology for enhancing separation and purification[J]. Biopharm International, 2019, 32: 22-25.
[9] Huang Y. Exploring the application and development of membrane separation technology in environmental engineering[J]. Northern Environmental, 2019, 31: 112-113.
[10] Singh M, Rasdi F. Colloidal properties of epoxidized natural rubber latex prepared via membrane separation technology[J]. Journal of Rubber Research, 2019, 22: 153-167.
[11] Chen L, Wu F, Li Y, et al. Robust and elastic superhydrophobic breathable fibrous membrane with in situ grown hierarchical structures[J]. Journal of Membrane ence, 2018, 547: 93-98.
[12] Shih T, Liu N, Zhang Q, et al. Preparation of DOPA-TA Coated Novel Membrane for Multifunctional Water Decontamination[J]. Separation and Purification Technology, 2017, 194: 135-140.
[13] Zhu Y, Wang J, Zhang F, et al. Zwitterionic nanohydrogel grafted PVDF membranes with comprehensive antifouling property and superior cycle Stability for oil-in-water emulsion separation[J]. Advanced Function Materials, 2018, 28: 1-10.
[14] Tang Z, Zhang Z, Han Z, et al. One-step synthesis of hydrophobic-reduced graphene oxide and its oil/water separation performance[J]. Journal of Materials Science, 2016, 51: 1-8.
[15] Fan T, Miao J, Li Z, et al. Bio-inspired robust superhydrophobic-superoleophilic polyphenylene sulfide membrane for efficient oil/water separation under highly acidic or alkaline conditions[J]. Journal of Hazardous Materials, 2019, 373: 11-22.
[16] Xiong Z, Lin H, Zhong Y, et al. Robust superhydrophilic polylactide (PLA) membrane with TiO2 nano-particles inlayed surface for oil/water separation[J]. Journal of Materials Chemistry A, 2017, 5: 6538-6545.
[17] Chen W, Su Y, Zheng L, et al. The improved oil/water separation performance of cellulose acetate-graft-polyacrylonitrile membranes[J]. Journal of Membrane Science, 2009, 337: 98-105.
[18] Yang X, Liu L, Jiang S. Enhancement of hydrophilicity and anti-fouling property of polysulfone membrane using amphiphilic nanocellulose as hydrophilic modifier[J]. Membrane Water Treatment, 2019, 10: 461-469.
[19] Zhao J, Han H, Wang Q, et al. Hydrophilic and anti-fouling PVDF blend ultrafiltration membranes using polyacryloylmorpholine-based triblock copolymers as amphiphilic modifiers[J]. Reactive & Functional Polymers, 2019, 139: 92-101.
[20] Goel V, Mandal U. Surface modification of polysulfone ultrafiltration membrane by in-situ ferric chloride based redox polymerization of aniline-surface characteristics and flux analyses[J]. Korean Journal of Chemical Engineering, 2019, 36: 573-583.
[21] Zhao J, Han H, Wang Q, et al. Hydrophilic and anti-fouling PVDF blend ultrafiltration membranes using polyacryloylmorpholine-based triblock copolymers as amphiphilic modifiers[J]. Reactive & Functional Polymers, 2019, 139: 92-101.
[22] Liu F, Hashim N, Liu Y, et al. Progress in the production and modification of PVDF membranes[J]. Fuel and Energy Abstracts, 2011, 375: 1-27.
[23] Kang G, Cao Y. Application and modification of poly(vinylidene fluoride) (PVDF) membranes–A review[J]. Journal of Membrane ence, 2014, 463: 145-165.
[24] 邵自强, 杨斐霏, 王文俊, 王飞俊. 羧甲基纤维素的环氧氯丙烷交联改性研究[J]. 纤维素科学与技术, 2007, 2: 26-29.
[25] Ma S, Lin L, Wang Q, et al. A new strategy to simultaneously improve the permeability and antifouling properties of EVAL membranes via surface segregation of macrocyclic supra-amphiphiles[J]. Journal of Membrane ence, 2020, 595: 117562-117572.
[26] Ma S, Lin L, Wang Q, et al. Modification of supramolecular membranes with 3D hydrophilic slide-rings for improvement of antifouling properties and effective separation[J]. ACS Applied Materials & Interfaces, 2019, 11: 28527-28537.
[27] Xie M, Wang J, Wu Q, et al. Nanofiltration Membranes via Layer-by-layer Assembly and Cross-linking of Polyethyleneimine/Sodium Lignosulfonate for Heavy Metal Removal[J]. Chinese Journal of Polymer Science, 2020, 9: 965-972.
[28] 苏星, 彭云峰. 超疏水的理论模型发展及其影响因素分析[J]. 功能材料, 2016, 47: 1-9.
[29] Park S, Kim J, Park C. Analysis of the wetting state of super-repellent fabrics with liquids of varying surface tension[J]. Rsc Advances, 2016, 6: 45884-45893.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com