膜科学与技术

基于低聚酰亚胺含氮介孔碳材料的制备

作者：刘圆圆¹，²，早川晃镜²，王晓琳¹

单位： 1. 清华大学化学工程系膜材料与工程北京市重点实验室，北京 100084；2. 东京工业大学有机和高分子材料系，东京 152-8552

关键词：低聚酰亚胺；含氮介孔碳材料；高规整；形貌调控

出版年,卷(期):页码： 2014,34(5):33-39

摘要：

以低聚酰亚胺为氮源前驱体、交联酚醛树脂为碳源、嵌段共聚物为软模板剂，通过相分离自组装、交联和高温锻烧处理制备了新型高规整含氮介孔碳材料，并用FT-IR、SEM、TEM、热重分析和小角X光散射等测试方法表征介孔碳材料的组成与结构。结果表明，处理温度达350℃时嵌段共聚物模板可被成功移除，进而形成多孔结构；温度达600℃时体系完全碳化，可得到高规整的多孔含氮碳材料。通过调节体系中氮源、碳源及模板剂的相对比例可实现形貌由立方结构向柱状和层状结构的过渡，进而实现对含氮介孔材料形貌的有效调控。

Well-ordered nitrogen-dopedmesoporous carbon materials were prepared via a soft-templating method by using block copolymers as the template, oligoimide as the nitrogen source and crosslinked phenolic resin as the carbon source, through successive steps of self-assembly, crosslinking, and heat treatment. FT-IR, SEM, TEM, thermogravimetric analysis and small angle x-ray diffraction were used to characterize the constitution and mesostructures of obtained materials. The results indicated that the block copolymer templates were successfullyremoved at 350 ℃ to generate porous structures, and at a higher temperature of 600 ℃, the matrix consisting of oligoimides and crosslinked phenolic resin will carbonize to form the nitrogen-doped mesoporous carbons with high regularity. Since carbon and nitrogen precursors selectively dissolve in the hydrophilic phase formed by the block copolymer templates and change the hydrophilic/hydrophobic ratios, the morphologies of the newly developed carbon materials can be finely tuned by adjusting the ratios of each component in the system, and numerous morphologies, including sphere, cylinder and lamellar can be obtained.

刘圆圆(1989-)，女，福建人，博士研究生，主要研究方向为规整结构新型膜的制备及研究，联系电话：010-62794742，E-mail: liuyuanyuan07@gmail.com **通讯作者：E-mail：xl-wang@tsinghua.edu.cn.

参考文献：

[1] Deng Y, Wei J, Sun Z,et al. Large-pore ordered mesoporousmaterials templated from non-pluronicamphiphilicblock copolymers[J]. ChemSoc Rev, 2013, 42: 4054-4070.
[2] Li W, Zhao D. An overview of the synthesis of orderedmesoporousmaterials[J]. ChemCommun, 2013, 49: 943-946.
[3] Fang Y,Lv Y,Che R, et al. Two-dimensional mesoporouscarbon nanosheets and their derived graphenenanosheets: synthesis and efficient lithium ion storage[J]. J Am ChemSoc, 2013, 135: 1524-1530.
[4] Xue C,Lv Y, Zhang F,et al. Copper oxide activation of soft-templatedmesoporouscarbons and their electrochemical properties for capacitors[J]. J Mater Chem, 2012, 22: 1547-1555.
[5] Wu D, Xu F, Sun B, et al. Design and preparation of porous polymers[J]. Chem Rev, 2012, 112: 3959-4015.
[6] WeiJ, ZhouD, SunZ, et al. A controllable synthesis of rich nitrogen-doped ordered mesoporouscarbon for CO2capture and supercapacitors[J]. AdvFunct Mater, 2013, 23: 2322-2328.
[7] ChenH, SunF, Wang J, et al. Nitrogen doping effects on the physical and chemical properties of mesoporouscarbons[J]. J PhysChem C, 2013, 117: 8318-8328.
[8] Ryoo R,Joo S H, Kruk M, et al. Ordered mesoporouscarbons[J]. Adv Mater, 2001, 13: 677-681.
[9] Kim T W, Park I S,Ryoo R. A synthetic route to ordered mesoporouscarbon materials with graphitic pore walls[J]. AngewChem, 2003, 115: 4511-4515.
[10] Lu A, Kiefer A, Schmidt W, et al. Synthesis of polyacrylonitrile-based ordered mesoporouscarbon with tunable pore structures[J]. Chem Mater, 2004, 16: 100-103.
[11] Talapaneni S N,Anandan S, Mane G P,et al. Facile synthesis and basic catalytic application of 3D mesoporouscarbon nitride with a controllable bimodal distribution[J]. J Mater Chem, 2012, 22: 9831-9840.
[12] Yang W,Fellinger T P,Antonietti M. Efficient metal-free oxygen reduction in alkaline medium on high-surface-area mesoporousnitrogen-doped carbons made from ionic liquids and nucleobases[J]. J Am ChemSoc, 2011, 133: 206-209.
[13] Shrestha S,Mustain W E. Properties of nitrogen-functionalized ordered mesoporouscarbon prepared using polypyrroleprecursor[J]. J ElectrochemSoc, 2010, 157: B1665-B1672.
[14] Xia Y, Mokaya R. Synthesis of ordered mesoporouscarbon and nitrogen-doped carbon materials with graphitic pore walls via a simple chemical vapor deposition method[J]. Adv Mater, 2004, 16: 1553-1558.
[15] Datta K K R,Balasubramanian V V,Ariga K, et al. Highly crystalline and conductive nitrogen-doped mesoporouscarbon with graphitic walls and its electrochemical performance[J]. ChemEur J, 2011, 17: 3390-3397.
[16] Liu R, Wu D, Feng X, et al. Nitrogen-doped ordered mesoporousgraphitic arrays with high electrocatalyticactivity for oxygen reduction[J]. AngewChem, Int Ed, 2010, 49: 2565-2569.
[17] Liang C, Hong K,Guiochon G A, et al. Synthesis of a large-scale highly ordered porous carbon film by self-assembly of block copolymers[J]. AngewChem, Int Ed, 2004, 43: 5785-5789.
[18] Liang Y, Fu R, Wu D. Reactive template-induced self-assembly to ordered mesoporouspolymeric and carbonaceous materials[J]. ACS Nano, 2013, 7: 1748-1754.
[19] Meng Y,Gu D, Zhang F,et al. A family of highly ordered mesoporouspolymer resin and carbon structures from organic-organic self-assembly[J]. Chem Mater, 2006, 18: 4447-4464.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com