退火工艺对钛酸锶钡铁电多层膜结构与物性的影响
作者:魏坤1,张续辰1,洪学鹍2
单位: 1. 昆明理工大学信息工程与自动化学院,昆明 650500;2. 昆山科技局,昆山 215300
关键词: 钛酸锶钡;铁电多层膜;溶胶凝胶方法;退火工艺
出版年,卷(期):页码: 2014,34(6):51-55

摘要:
本文立足于无铅型钛酸锶钡(BST)铁电多层膜的制备及物性研究。采用溶胶-凝胶方法制备了Ba0.9Sr0.1TiO3铁电多层膜,并利用快速退火炉对多层膜进行热处理。重点分析两种不同热处理工艺对钛酸锶钡多层膜微观结构及相关物理性能的影响。通过X射线衍射(XRD),扫描隧道显微镜(SEM)及可见光范围反射谱测量等的表征方法,研究钛酸锶钡铁电多层膜微观结构的演化和形成机理,为制备性能优良的钛酸锶钡铁电多层膜提供基础数据。
Research on the fabrication and physical properties of ferroelectric multilayer was made based on lead-free barium strontium titanate (BST). The BST multilayer was prepared by sol-gel technique and then annealed by rapid thermal processing. The influence of two different annealing processes on the microstructure and related physical properties was mainly analyzed. The microstructure evolution and forming mechanisms of BST multilayer were explored by X-ray diffraction (XRD), scanning electron microscope (SEM), reflectance measurement in the range of visible light and other characterizing methods, which provided fundamental data for the fabrication of BST multilayers with excellent performance.
魏坤(1989-),男,江苏徐州人,硕士研究生,研究方向为多传感器及阵列信号处理

参考文献:
[1]  Scott JF. 铁电存储器[M]. 北京:清华大学出版社, 2004, p2-6。
[2]  Lines ME Glass AM. Principles and Applications of Ferroelectric and Related Materials[M]. Oxford, UK: Clarendon Press, 2001, P3-16。
[3] 李恒德.现代材料科学与工程辞典[M].                                                     山东科学技术出版社, 2002, p444。
[4]  殷之文. 电介质物理学[M]. 北京:科学出版社, 2003, p9-25。
[5]  钟维烈. 铁电体物理学[M]. 北京:科学出版社, 2000, p1-18。
[6]  KS Grabowski. Anion assisted pulsed laser deposition of lead zirconate titanate films[J]. Ferroelectrics 116 ,19,1991。
[7]  A.Erbil,Y.Kim,and RA Gerhardt.Giant Permittivity in Epitaxial Ferroelectric Heterostructures [J]. Phys. Rew. Lett.,77,1628 (1996)。
[8]  DH Bao, SK Lee, XH Zhu,et al. Epitaxial growth of multilayered (Bi,La)4Ti3O12/Pb(Zr,Ti)O3 ferroelectric thin filmswith different orientations [J]. Appl. Phys. Lett.,86, 082906 (2005)。  
[9]  单连伟,丁碧妍,付兴华等. (Ba,Sr)Ti03铁电薄膜制备技术及其研究进展[J]. 桂林电子工业学院学报,2003,6:36-39。
[10] Min YS, Cho YJ, Kim D, et a1. Liquid Source— MOCVD of BaxSr1-xTiO3 (BST) Thin Films with a N-alkoxy-β-ketoiminato Titanium Complex[J]. Chem Vapor Deposition,2001,Vr01.7:146.149。
[11]  Sehmidt C. And Burte EP MOCVD of Ferroelectric thin films[J]. MICROELECRRON RELIAB, 1999, vol.39:257-260。
[12] Leedham TJ, Jones AC, Wright PJ, et al. Novel precursors for the MOCVD of Ferroelectric thin films[J]. Integrated Ferroelectrics, 1999, vol. 26:85-92.
[13] XK Hong, GJ Hu, J.Chen, et al. Ba0.9Sr0.1TiO3-based Bragg reflectors fabricated from one single chemical solution[J]. Appl. Phys. Lett. 89, 082902(2006)。
[14]  张道中. 光子晶体[J]. 物理[3] 141-147.1994。
[15]  赵 莉,杨传仁,冷文建等. 退火工艺对钛酸锶钡薄膜结构的影响[J]. 电子元件与材料, 2004,10:17-19。
[16]  李志远,张道中. 光子晶体和负折射介质材料[J]. 中国基础科学[6] 7-14,F0003.2005。
[17] 张光寅. 光子学若干前沿问题[J]. 物理,29:3-4,2000。
[18] HA Macleod. Thin-Film Optical Filters (Senond  Edition) [J]. 1986。
[19]  唐晋发,郑权. 应用薄膜光学[M]. 上海科学技术出版社,1984。
[20]  HA.麦克劳德著,周九林,伊百树译. 光学薄膜技术[M]. 国防工业出版社,1974。
[21]  田雪雁,徐征. 铁电薄膜退火方法的研究[J]. 功能材料,2007(38):807-808。
[22] 韦其红,赵振华,付兴华等. 退火温度对铁电薄膜钛酸锶钡的影响[J]. 陶瓷学报,2006,1:92-96。

服务与反馈:
文章下载】【加入收藏

《膜科学与技术》编辑部 地址:北京市朝阳区北三环东路19号蓝星大厦 邮政编码:100029 电话:010-64426130/64433466 传真:010-80485372邮箱:mkxyjs@163.com

京公网安备11011302000819号