膜科学与技术

新型折板膜组件的优化设计及其在MBR中的应用研究

作者：张建鹏，张捍民杨凤林

单位：大连理工大学环境学院工业生态与环境工程教育部重点实验室，中国辽宁大连 116024

关键词：膜污染；折板膜；竖直倾角；膜间距

出版年,卷(期):页码： 2015,35(6):72-80

摘要：

膜污染是膜生物反应器迄需解决的关键问题。为了在不增加能耗的条件下减缓膜污染，本文改进平板膜组件，设计新型折板膜组件。通过恒压膜过滤实验对折板膜组件的竖直倾角和膜间距进行了优化，应用粒子图像测速技术对折板膜面附近的流场特性进行了表征，并通过折板膜组件在MBR中的应用考察了其抗污染性能和出水效果。研究结果表明，在15°的最优竖直倾角下，相对平板膜组件，折板膜组件获得了50.3%的最高稳定通量提升幅度；折板膜组件的最优膜间距为30 mm，且膜组件正下方曝气能获得更高的稳定通量；另外，折板膜组件的跨膜压力上升速率约为平板膜组件的0.4倍，对COD和NH3-N的去除效率分别高于90%和80%。

Membrane fouling is a key problem to be solved in MBR. In order to mitigate the membrane fouling without extra energy consumption, a new folded plate membrane module was designed by modifying the configuration of the flat sheet membrane module. The constant trans-membrane pressure (TMP) membrane filtration experiments were conducted to optimize the vertical inclination angle and membrane spacing of the folded plate membrane module, and the particle image velocimetry (PIV) technology was used to characterize the feature of flow field near the membrane surface. Finally, the application of the folded plate membrane module in MBR was to investigate its antifouling property and effluent effect. The research results showed that, the optimal vertical inclination angle and membrane spacing of the folded plate membrane module were 15° and 30 mm, respectively. And a larger stable flux could be obtained when the aeration position was directly below the folded plate membrane module. Additionally, the rising rate of TMP of the folded plate membrane module was 0.4 times as fast as that for the flat sheet membrane module, and the removal rate of COD and NH3-N for both folded plate membrane module and flat sheet membrane module were above 90% and 80%, respectively.

张建鹏(1989-)，男，山西晋城市人，硕士，主要从事膜法水处理及MBR中膜污染控制技术的研究，Email：zhangjianpeng0227@163.com. * 通讯联系人，电话：0411-84706173，Email：zhanghm@dlut.edu.cn.]，

参考文献：

[1]高廷耀, 顾国维, 周琪. 水污染控制工程[M]. 北京: 高等教育出版社, 2007.
[2]Judd Simon, Judd Claire. The MBR Book: Principles and Applications of Membrane Bioreactors for Water and Wastewater Treatment[M]. Amsterdam: Elsevier Science, 2006.
[3]Wang Zhiwei, Wu Zhichao, Yu Guoping, et al. Relationship between sludge characteristics and membrane ?ux determination in submerged membrane bioreactors[J]. Journal of Membrane Science, 2006, 284: 87-94.
[4]Dae Sik Kim, Kang Jong Seok, Lee Young Moo. The Influence of Membrane Surface Properties on Fouling in a Membrane Bioreactor for Wastewater Treatment[J]. Separation Science and Technology, 2004, 39(4): 833-854.
[5]Meng Fangang, Chae So-Ryong, Drews Anja, et al. Recent advances in membrane bioreactors(MBRs): Membrane fouling and membrane material[J]. Water Research, 2009, 43: 1489-1512.
[6]魏鹏, 姚萌, 张凯松. 曝气方式对MBR平板膜组件流体力学特征的影响[J]. 中国环境科学, 2011, 31(1): 38-43.
[7]张传义, 王勇, 黄霞, 等. 一体式膜-生物反应器经济曝气量的试验研究[J]. 膜科学与技术, 2004, 24(5): 11-15.
[8]Marel Perry Van Der, Zwijnenburg Arie, Kemperman Antoine, et al. In?uence of membrane properties on fouling in submerged membrane bioreactors[J]. Journal of Membrane Science, 2010, 348: 66-74.
[9]Jiang Tao, Zhang Hanmin, Yang Fenglin, et al. Relationships between mechanically induced hydrodynamics and membrane fouling in a novel rotating membrane bioreactor[J]. Desalination and Water Treatment, 2013, 51: 2850-2861.
[10]李波, 叶茂盛, 杨凤林, 等. SMBR中梯型平板膜组件增强曝气作用的数学模型分析[J]. 中国科学. E辑, 技术科学, 2009, 39(7): 1338-1346.
[11]Liu Lifen, Xu Xiaojing, Zhao Chuanqi, et al. A new helical membrane module for increasing permeate ?ux[J]. J Membr Sci, 2010, 360: 142-148.
[12]Jie Liang, Liu Lifen, Yang Fenglin, et al. The con?guration and application of helical membrane modules in MBR[J]. Journal of Membrane Science, 2012, 392-393: 112-121.
[13]Winzeler H B, Belfort G. Enhanced performance for pressure-driven membrane processes: The argument for fluid instabilities[J]. Journal of Membrane Science, 1993, 80: 35-47.
[14]Kim Jun Young, Chang In Soung, Park Hun Hwee. New configuration of a membrane bioreactor for effective control of membrane fouling and nutrients removal in wastewater treatment[J]. Desalination, 2008, 230: 153-161.
[15]Wang Z., Cui Y., Yao J., et al. The in?uence of various operating conditions on speci?c cake resistance in the cross?ow micro?ltration of yeast suspensions[J]. Desalination and Water Treatment, 2009, 1: 237-247.
[16]Liu Zhengliang, Zheng Ying. PIV study of bubble rising behavior[J]. Powder Technology, 2006, 168: 10-20.
[17]Braak Etienne, Alliet Marion, Schetrite Sylvie, et al. Aeration and hydrodynamics in submerged membrane bioreactors[J]. J. Membr. Sci., 2011, 379: 1-18.
[18]李春丽, 田瑞, 陶中兰, 等. 膜生物反应器内流场动力学特性的PIV实验研究[J]. 环境工程学报, 2013, 7(3): 918-924.
[19]于艳, 樊耀波, 徐国良, 等. 计算流体力学对膜生物反应器水力学特征的模拟研究[J]. 膜科学与技术, 2011, 31(4): 9-16.
[20]Lee J, Ahn W Y, Lee, C H. Comparison of the ?ltration characteristics between attached and suspended growth microorganisms in submerged membrane bioreactor[J]. Water Research, 2001, 35: 2435-2445.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com